equipment reviews
This Month's Featured Equipment Reviews
ZenWave Cables and SurgeX ZenWave Edition Review
REDGUM BLACK RGi35ENR Integrated Amplifier Review
Linear Tube Audio MicroZOTL 2.0 Headphone Amp & Preamp Review
iFi Micro iUSB 3.0 & Gemini USB Cable Reviews
Marantz M-CR611 Network CD Receiver Review
Latest AV News
Preamplifier Forum Topics:
Classic Preamplifier Reviews
Past Preamplifier News
Sunfire Theater Grand IV AV Preamplifier/Processor Print E-mail
Friday, 01 October 2004
Article Index
Sunfire Theater Grand IV AV Preamplifier/Processor
Page 2
Page 3
ImageTechnology for home theater preamp/processors and receivers is fairly mature now that the addition of new surround sound formats has settled down somewhat. The risk of buying a preamp/processor that doesn’t have the latest decoding scheme has definitely diminished. At a certain price point, most components have all of the necessary capabilities to handle the different surround sound and high-resolution formats. The surround sound speaker format discussion, i.e., how many channels do we really need, has seemingly run its course. There was a time when DTS-ES and Dolby Digital EX clouded the consumer’s view as to which processing option was best, as well as raising the question of how best to enjoy it. These two options have been around long enough that most savvy consumers understand what they represent. Then another question was which high resolution format was going to be the clear winner: SACD or DVD-Audio? Well, the equipment manufacturers settled that by providing the ability to do both. So, other than some proprietary DSP and other little bells and whistles, it seems that it is a lot easier today to make a preamp/processor choice that is not fraught with the danger of the equipment becoming outdated. Sunfire provides a choice that falls into the “almost future-proof” category with the Theater Grand IV, an audiophile-grade preamp/processor/tuner, that incorporates the latest technology and processing software and still remains true to the sound.

The Sunfire TGIV (Theater Grand IV) packaging has changed very little from the prior model, the TGIII. It is 17 inches wide, five-and-three-quarters inches high, 16.5 inches deep and weighs 24 pounds. The TGIV retains the charcoal gray anodized faceplate, chassis, and top cover. The faceplate has a horizontal linear grained texture that continues to the top cover for a uniform look. This styling has been with the Sunfire products for a while and still looks relevant today. The radius corners give the TGIV a refined and unique presence that speaks of pride in brand recognition. The front panel controls are identical, sporting the same bright orange buttons. The exception is an elliptical shape to the display recess that frames the familiar blue characters, as opposed to a rectangular one on the TGIII. Looking at the back panel you’ll find it also remains similar. To connect to various high-definition sources, there are three 100MHz+ HDTV compatible high-bandwidth component video inputs, and two component video outputs. Six audio/video inputs, with composite video, S-video and audio, and three composite video, S-video and audio outputs gives you plenty of connectivity, and a new feature allows the ability for video format conversion that automatically up-converts composite to S-video and S-Video to component video to keep you from having to change inputs on your TV. Eight channels of analog inputs are provided for connecting a DVD-Audio or SACD player. There are six coaxial (S/PDIF) and four optical digital connections with a single coaxial and optical output, providing the ability to send a direct digital signal, whether it is 5.1 or analog, to a CD burner or a PC if you choose. Need more than one subwoofer? The TGIV gives you the ability to run four. Do you like Firewire? The TGIV has an IEEE-1394 port.

Although the TGIV has their proprietary “side axis” channels, which are matrixed from the front left and right channels that work in two-channel as well as surround. I’m not sure how many people will actually use this feature, especially when only a small percentage of users actually take advantage of 7.1. The cost of more speakers, amps and cabling often makes the monetary decision an easy one. Sunfire keeps things simple and cost-effective in comparison to other high-end AV preamps.

Thoughtfully, the Sunfire TGIV has separate high-c
urrent trigger and infrared outputs for both zones. Sunfire also includes, much to my delight, balanced outputs for the main 7.1 channels of the processor. This robust interconnect exceeds the performance of RCA interconnects with their inherent noise cancellation.

Gizmos and Gadgets
The confusing formats for decoding movie and music seems to have settled down, so it is a little more clear-cut as to what to get when you’re shopping for a preamp/processor. Both DTS and Dolby Digital appear to be happy with their architecture, whether it is Dolby Digital EX or DTS ES, for up to eight channels of discrete information. The changes the buyer needs to be aware of mainly center on playback of older, two-channel material. The TGIV incorporates both DTS Neo 6 and the newer Dolby Digital Pro Logic IIx. Both provide matrix 5.1 and 6.1 playback of two-channel source material, such as VHS tapes, cassettes, CDs and, in the case of the Theater Grand IV, vinyl. These decoding options give the user probably more than he or she will ever use to create satisfying multi-channel playback from older libraries of movies and music.

Yes, I did mention vinyl. The TGIV has a moving magnet
phono stage, which is a peculiar feature on today’s preamp/processors. Who plays vinyl? Well, I can now, with the TGIV. I’ve ignored my 300+ album collection, which has been sitting in the closet over the years, due to the fact that I didn’t want to spend the cash it would require to get analog to sound better than my digital rig, because if it didn’t sound better than CD, what was the point? Well, the point is I have a lot of records that may never be released on DVD-Audio, SACD, or even CD, and I like them. And also I’ve relaxed my outlook a bit when it comes to vinyl playback, especially when a phono stage comes along that is already a part of another component. At that point, you have to ask yourself, “Why not?” So I did.

The TGIV sports a 40-preset station AM/FM tuner section, with Sunfire’s Dynamic Tuner Noise Reduction to help bring in those weak FM stations. The dual zone capability allows a separate set of speakers and an amplifier to utilize the components hooked up to the TGIV, independent of what is playing on the TGIV. This i
s a good way to leverage your equipment, provided it is easy to get a pair of RCA interconnects to the second zone.

The TGIV has digital bass management with crossover frequencies of 40 to 160Hz at 10Hz increments, which was adequate for my situation. My biggest gripe is with the bass management and the fact that there is no bass management when in direct analog mode. However, Enhanced Bass mode will output a signal to your subwoofer when listening to two-channel source material, as long as your main speakers are set to large. That would force you to make adjustments at the subwoofer, which is not very desirable, but it is doable. Most other products at this level suffer from the same malady.

At the heart of the TGIV are a 24-bit A-to-D converter and 24-bit/192kHz multi-bit D-to-A converters take full advantage of all of the high-resolution formats you’re liable to run across. This is a very flexible set-up.

A nice feature is the auto signal input switching mode that turn
s the unit on when presented with a signal source, automatically selecting the source and surround mode. I like the idea of the system being smart enough to switch to the correct source. The problem with the TGIV is, if you are using a universal player like my Denon DV2900, the TGIV does not sense the frequency of the digital stream to know what format is being played. I had to manually change the TGIV to the right input for DVD-Audio and SACD, as well as CD, to get the right processing.

The remote is a strong point on the Sunfire TGIV. The look, feel and layout of the remote control compliments the other aspects of the TGIV. The control, made by Universal Remote, is basically a re-branded TheaterMaster. One of the biggest snafus many manufacturers repeatedly fail to recognize is the backlighting on the remote. If you are running a front projection set-up like I am, turning the light on to view the remote kills the movie-going experience. How else are you expected to know where all of the functions for their powerful preamp/processors are if there are no backlighting options? Brail? The Sunfire remote is one of the better ones in this respect. A cool blue backlight allows the user to easily see all of the remote functions with the push of a button that is conveniently by itself on the right side of the body of the remote. The light remains on approximately 10 seconds, then shuts off. Sunfire also did a nice job with the manual, explaining every function very clearly. Using the pre-programmed codes, I was able to get my Denon player working in less than a minute. The three macro buttons allow customization of your system. It can learn commands from other remotes and can also control up to 10 different components.

The rest of the system set-up is very straightforward – possibly the easiest of any AV preamp on the market today. The hardest part about setting up the Sunfire Theater Grand IV is sorting out all of the connections on the back panel, but any AV preamp has that issue. I had absolutely zero problems integrating the TGIV into my system. Once all of the components were plugged in, I turned on the power and checked each of them to make sure that they were communicating properly with TGIV. Then I pressed the Menu button on the remote, which brought up the onscreen display to access the functions of the system set-up. I ran the TGIV in balanced mode with Cardas Golden Cross two-meter balanced interconnects and the eight analog inputs. For DVD-Audio/SACD, I used Cardas Golden Cross two-meter RCA interconnects. I followed the quick start guide to see how well this worked.

Starting off from the main menu allows you to access speaker settings and the modes you want to set up for Dolby Digital and DTS playback, like the output level adjustment to level match all of your components or the speaker configuration you want to use for that component and the DSP for that component if so desired. In the settings menu, you can set up all of your speaker’s parameters, such as size, distance adjustments within one inch and level match in .5 dB increments, which is an improvement over the 1 dB increments that the TGIII gave you. As mentioned earlier, 40Hz to 160Hz crossover adjustments are made with 10Hz graduation. This I did first, setting up the correct distances, crossover frequencies and speaker size. Then I level matched all of my speakers, using a Radio Shack analog SPL meter.

There is a fine level adjustment you can do outside of the set-up menu called Trim adjustments. It lets you fine-tune the speaker and subwoofer output levels on the fly for fine-tuning your system after the initial level matching is done for a total of +10dB to –20dB of adjustment. After that was done, I then went back and adjusted the level for each component that was hooked up to the TGIV. If you want, there is a tone setting, allowing for bass and treble adjustment. However, I’m not a big fan of this.


  home theater news  |  equipment reviews 
  blu-ray reviews  |  dvd  |  theatrical reviews  
  music download reviews  |  music disc reviews
  contact  |  about-us  |  careers   |  brands 
  RSS   |  AVRev Forums
  front page  |  virtual tours  |  dealer locator
  how to features  |   lifestyle & design articles
  Want Your Home Theater Featured on MHT?
   CE Partners: HDD  |  HDF  |  VGT  |  SD  |  DVD
  Advertise with Us | Specs | Disclaimer | Sponsors
  privacy policy | cookie policy | terms of use
  909 N. Sepulveda Blvd. El Segundo, CA 90245
  Ads: 310.280.4476 | Contact Us
  Content: 310.280.4575 | Mike Flacy