equipment reviews
This Month's Featured Equipment Reviews
ZenWave Cables and SurgeX ZenWave Edition Review
REDGUM BLACK RGi35ENR Integrated Amplifier Review
Linear Tube Audio MicroZOTL 2.0 Headphone Amp & Preamp Review
iFi Micro iUSB 3.0 & Gemini USB Cable Reviews
Marantz M-CR611 Network CD Receiver Review
Latest AV News
AV News Forum Topics:
Getting Started with Multi-Room Audio Print E-mail
Monday, 01 November 2010
Article Index
Getting Started with Multi-Room Audio
PowerLine Sonos and More

ImageWhen we talk about multi-room audio, we've got a certain image in mind.  We picture controlling the source for any room in the house from any room in the house.  We imagine touch control pads in each and full control over a tower of CD players, radios, computers and other music sources.  It's a great goal, but it's not as simple as just going out and buying one component.

Multi-room audio systems are incredibly diverse, and come in configurations to meet a wide range of needs.  Even if you're hiring someone to take care of installation, you'll need to do a bit of research up front to figure out just what kind of setup is right for you.  Different homes will allow for different systems.  If you've got a new construction or you're willing to go through the trouble of wiring your walls, there are options available to you that aren't available to someone in an apartment, for example.
The simplest form of multi-room audio may be something that you already have in your home.  If you've got a high-end receiver or preamp, chances are it's equipped with zone functionality.  Even some mid-level receivers are starting to come packed with it, so if in doubt take a look at your gear. Each of these zone outputs – some receivers have a few - can be routed to a different room in the house.  It's different than simply attaching speakers to an extra output, since each zone can be set up to play audio from a different source.  If you want the radio on in one room and a movie in the other, you can do it.

Receiver multi

There's a downside to using a single receiver solution though, and it's a big one.   Unless you've set something up specifically to deal with the issue, you'll have to be in the same room as the receiver to change your settings.  That includes volume, source selection and power.  A few receivers on the market today can be controlled via WiFi devices like the iPhone, which makes them excellent choices for this kind of setup.  Since they use WiFi, you don't have to be within sight or even in the same room to adjust your controls.  This kind of an arrangement can work nicely for simpler desires, like getting music to outdoor speakers or making sure you've got something to listen to in the kitchen.  To get the whole home audio experience though, you'll need to step up your game.

The traditional whole-home audio system makes use of a separate component to control the whole system.  It's the brain of the system, and the hub of what amounts to a network running through your entire house. These systems can be as simple or as complex as you want, and as bare-bones or as robust as you need.  Most whole-home audio systems require a bit of wiring – some don't, as I'll discuss later in the article – so unless you really feel up to the task, you'll need to call in an installer to take care of the job.

HAI Hi-Fi 2 HubThe process gets simpler and your options get wider if you're installing into a house that's under construction.  Rather than worry about an alternative solution, you can pre-wire each room in the house for audio.  Take HAI's new Hi-Fi 2 as an example of just how simple it can be.  The Hi-Fi 2 hub is designed to sit in your basement, running audio from up to eight sources to up to eight different zones.  Adjusting the settings for each individual zone is simple, and is handled via a wall plate in the room.  The control unit has four buttons.  One turns the volume down, one turns it up, one turns the audio on or off and the final button changes the source. It's not burdened with an excess of features, but it's not incredibly complicated to set up or use either.  It's the sort of thing you could install yourself if you wanted to, and it allows you to make changes if you desire.

Multi-room audio can be far more complex than that.  Some home automation systems boast incredible amounts of features in addition to providing audio throughout your whole home. They include your multi-room audio solution into a suite of other options, like lighting control, temperature control and security.  Of course, this added functionality can come at the cost of customizability. Many of these higher end systems need to be installed and programmed by professionals and don't give you the option to do anything yourself.  If you've set up your own system and you want to add something to it, you can do so.  If you're using one of the high-end closed source systems though, you don't have that option.

That's not to say that going with a closed source solution is a bad idea by any means.  Professional installers can set up equipment far more quickly and efficiently than the average homeowner, and they guarantee that the job will be done right.  They can also fully customize the system to fit your needs, so you shouldn't have to change anything in the first place.


  home theater news  |  equipment reviews 
  blu-ray reviews  |  dvd  |  theatrical reviews  
  music download reviews  |  music disc reviews
  contact  |  about-us  |  careers   |  brands 
  RSS   |  AVRev Forums
  front page  |  virtual tours  |  dealer locator
  how to features  |   lifestyle & design articles
  Want Your Home Theater Featured on MHT?
   CE Partners: HDD  |  HDF  |  VGT  |  SD  |  DVD
  Advertise with Us | Specs | Disclaimer | Sponsors
  privacy policy | cookie policy | terms of use
  909 N. Sepulveda Blvd. El Segundo, CA 90245
  Ads: 310.280.4476 | Contact Us
  Content: 310.280.4575 | Mike Flacy