av news
This Month's Featured Equipment Reviews
ZenWave Cables and SurgeX ZenWave Edition Review
REDGUM BLACK RGi35ENR Integrated Amplifier Review
Linear Tube Audio MicroZOTL 2.0 Headphone Amp & Preamp Review
iFi Micro iUSB 3.0 & Gemini USB Cable Reviews
Marantz M-CR611 Network CD Receiver Review
Latest AV News
Loudspeaker Forum Topics:
Classic Speaker System Reviews
Canton Announces Itís Ergo Line With Eight New Models Print E-mail
Friday, 17 October 2003
Canton has recently introduced eight new loudspeakers in its Ergo line, including a new powered subwoofer and seven full-range models featuring new crossover. New models include a trio of three-way floorstanders, two bookshelf speakers, two 2-1/2-way center channel speakers, and a 200-Watt powered subwoofer, and all are available in silver lacquer, black, beech, and cherry wood veneer finishes. The new Ergo full-range models incorporate improved crossover networks that are based on technology developed for the company's signature Karat Reference 2 DC loudspeaker system. These changes include the use of ICW polypropylene capacitors, which have led to a marked reduction in dielectric absorption or “memory” effects giving the models improved transient response and detail. The new crossover design also has a significant reduction in microphonics designed to improve mid-range and high-frequency reproduction. The new Ergo center channel speakers are 2-1/2-way designs optimized for horizontal mounting. The speakers use a centrally-mounted tweeter flanked by a pair of identical anodized aluminum drivers, one driving only the bass frequencies and the other driving bass and midrange. This configuration prevents wide variations in off-axis response due to cancellation between paired woofers, and improves midrange linearity. This overall design provides linear frequency dispersion even at listening angles as far as 30 degrees off-axis. All Ergo models feature Canton's legendary 1-inch Aluminum-Manganese tweeter, which delivers off-axis dispersion and linear response all the way out to 30 kHz. The tweeter's diaphragm and coil former are fabricated from a single piece to dampen high frequency resonances and provide dramatic improvement in heat dissipation characteristics. The floorstanding Ergo models feature Canton's Displacement Control (DC) technology, which uses a proprietary high-pass filter to prevent signals below the audible frequency range from interfering with the bass driver. In conventional speakers, these signals can generate high levels of unwanted harmonic distortion in the audible lower bass range, causing a muffled or "blatty" tonal quality. According to Canton, DC technology allows the speakers to provide clear, linear bass reproduction at much lower frequencies than would otherwise attainable. The standard finishes include real wood veneers of cherry, light beech, and black ash, or a silver lacquer, however the Ergo 202, 302, CM 402, and CM 502 have black lacquer finishes instead of black ash. The black and cherry speakers have perforated black metal grilles, while the beech and silver lacquer models have silver grilles.

The Ergo 1002 DC and 902 DC Floorstanding Speakers are three-way bass reflex models that feature broad and linear frequency response from 20 Hz all the way out to 30 kHz. The Canton Ergo 1002 DC features two 9-inch polypropylene woofers, while bass reproduction in the smaller Ergo 902 DC is handled by a pair of 8-inch woofers. Both models include the 7-inch aluminum midrange diaphragm and 1-inch tweeter used throughout the line. There are gold-plated bi-wire/bi-amp connections for a variety of amplifier setups. The Ergo 1002 DC and 902 DC have suggested retail prices of $3,000 and $2,400 per pair.

The Ergo 702 DC three-way floorstanding speaker is smaller then the 1002 DC and 902 DC, using one 7-inch aluminum cone for bass, and another for midrange duties. At 8.5-inches wide, 35.4-inches tall and 11.3-inches deep 8.5, the Canton Ergo 702 DC maintains the broad frequency response characteristics of the Ergo line, providing hi-fi reproduction from 25 Hz to 30 kHz. All other features are the same as the 1002 DC and 902 DC. The Ergo 702 DC has a suggested retail price of $1,800 per pair.

The Ergo CM 502 and CM 402 Center Channel Speakers are magnetically shielded for use as the center channel in a home theater system, and employ a Canton-designed 2-1/2-way crossover circuit to prevent the poor dispersion characteristics that plague most horizontal dual woofer center speakers, The Canton Ergo CM502 features two 7-inch aluminum membrane drivers flanking a single 1-inch aluminum-manganese tweeter and boasts a frequency response of 26 Hz to 30kHz. The Canton Ergo CM 402 uses 5-inch aluminum drivers and the same tweeter for a frequency response of 35 Hz to 30 kHz. The CM 502 is 19.7-inches wide, 8.9-inches tall, and 11.3-inches deep, while the smaller CM 402 is 15.9-inches wide, 5.9-inches tall, and 8.7-inches deep. The Canton Ergo CM 502 and CM 402 have suggested retail prices of $800, and $600 each.

The Ergo 302 and 202 Bookshelf and Stand-Mounted Speakers are designed to be equally at home on a shelf, or in conjunction with the optional LS 60 stand. The Canton Ergo 302 uses an 8-inch aluminum cone for the bass, while the Ergo 202 employs a 7-inch version. Both speakers feature gold-plated bi-wire/bi-amp connections to accommodate a variety of amplifier setups. The Ergo 302 and 202 have suggested retail prices of $1,400 and $1,200 per pair.

The Canton Ergo AS-1.2 SC Powered Subwoofer features a 10-inch Cellulose/Polyester woofer and 200 Watt amplifier in a bass-reflex enclosure. It features Canton's exclusive SC Technology with active electronic filtering to compensate for the acoustic characteristics of the enclosure and driver. This circuit blocks unwanted infrasonic signals, which can cause excessive driver excursions, and improves the speaker's linearity across the frequency range. According to Canton, SC Technology also increases the speaker's efficiency and stability for higher output levels, and reduces harmonic distortion for greater clarity. The Canton Ergo AS-1.2 SC Powered Subwoofer has a suggested retail price of $1,000.

Like this article? Bookmark and share with any of the sites below.
Digg!Reddit!Del.icio.us!Google!StumbleUpon!Yahoo!Free social bookmarking plugins and extensions for Joomla! websites!

  home theater news  |  equipment reviews 
  blu-ray reviews  |  dvd  |  theatrical reviews  
  music download reviews  |  music disc reviews
  contact  |  about-us  |  careers   |  brands 
  RSS   |  AVRev Forums
  front page  |  virtual tours  |  dealer locator
  how to features  |   lifestyle & design articles
  Want Your Home Theater Featured on MHT?
   CE Partners: HDD  |  HDF  |  VGT  |  SD  |  DVD
  Advertise with Us | Specs | Disclaimer | Sponsors
  privacy policy | cookie policy | terms of use
  909 N. Sepulveda Blvd. El Segundo, CA 90245
  Ads: 310.280.4476 | Contact Us
  Content: 310.280.4575 | Mike Flacy