|Paradigm Reference Signature Series Review|
|Home Theater Loudspeakers Speaker Systems|
|Written by Augie Bettencourt|
|Wednesday, 15 September 2010|
Page 1 of 2
Paradigm Electronics is a Canadian company that’s been focused on building products with a strong performance to value relationship for over 25 years, and specializes in the production of in-wall, on-wall and freestanding loudspeakers as well as subwoofers. Paradigm offers several different speaker lines across a broad price spectrum, but their flagship line is appropriately called the Reference Signature Series. I was excited about reviewing the very best home theater speaker system Paradigm has to offer in the Signature S8 v.3 floorstanding speakers, Signature C5 V.3 center speaker, Signature ADP 3 v.3 surround speakers, along with their SUB 25 v.3 subwoofer all in the Piano Black finish.
The asymmetrical design dissipates the back wave, while the center of the chamber is direct-coupled to the huge magnet structure, providing an efficient thermal escape path for heat generated by the voice coil. Strategically positioned cooling fins on the rear of the chamber transfer heat away from the motor. Injection-Molded Mineral-Filled Polypropylene Bass Cones. The mineral content, now 30%, and the injection-molding process results in a more rigid cone. The improvements reveal a claimed increase in repeatability as well as consistency of performance. Not to forget looks, premium Signature Series enclosures are enhanced by a choice of three stunning wood veneer finishes — Cherry, Natural Maple and Piano Black. In this case, the Piano Black finish is stunning.
Paradigm’s recently unveiled a 3rd version (v.3) of its flagship Reference Signature Series. The latest versions are claimed to be the highest output, most dynamic high end loudspeakers ever produced by Paradigm. Contributing to v.3’s 50 percent increase in output (3dB more sensitive) are extensive modifications to the bass/midrange drive units. Signature v.3 bass/midrange drivers are fitted with extreme low-density NLC (Non-Limiting Corrugated) TPE surrounds, FEA optimized and overmolded onto the cone. Paradigm claims 10 times more effective than standard thermoplastic elastomers in damping vibrations and resonances and the new corrugated design has increased peak-to-peak cone excursion from 20-mm in earlier versions to a full 30-mm.
A new long-stroke split-coil motor system takes advantage of the extreme excursion by doubling the linear portion of the stroke without requiring a larger magnet. The redesigned motor also keeps mass and inductance of the voice coil low for increased midrange clarity. Bass cones on Signature v.3 speakers were re-engineered for increased stiffness and better equipped for higher output with new NLC Santoprene surrounds. To support the extended excursion, the motor structure was also redesigned, increasing the linear portion of the stroke through voice coils almost double the original in length. New core parts including a yoke and pole piece were retooled and FEA-optimized and even the magnets were thickened to accommodate double-distance cone travel. The retail price for the Signature S8 v.3 in Piano Black is $4,399.00 each, the retail price for the Signature C5 v.3 in Piano Black is $4,299 each, the retail price for the Signature ADP3 v.3 in Piano Black is $1,999 each, and the retail price for the Signature SUB 25 in Piano Black is $4,799.00 each.
The final placement of any speaker is critical, especially when we’re talking about as many speakers as used in a 5.1 or 7.1 system. In my large 30 feet long x 20 feet wide room, I placed the Signature S8 v.3 (dimensions 48.5” H x x 8.5” W x 20.5” D) 4 feet from the back wall, and 3 feet from the side walls. The ideal listening position was with the speakers slightly toed-in. The Signature C5 V.3 center speaker was placed directly under my Dalite,133” HDTV, Dalite Cinema Contour screen on a speaker stand.
The Signature ADP 3 v.3 were wall-mounted 3 feet from the back wall, six feet off the floor, parallel to the seating area, and the SUB 25 v.3 in the front right corner of the room. On hand for the review was the OPPO BDP-83, Sony BDP-S1000ES Blu-ray players and Sony PS3 for A/V sources. On hand for the video display was the Vivitek H9080FD projector connected with a 35ft, M1000 HDTV HDMI Monster Cable. For part of the review the video connections were made through a Denon AVP-A1HDC1 A/V processor for video switching and audio processing.
Each time Monster Cable M1000 HDTV HDMI cables were used for video connections, Cardas Audio Golden Reference speaker and interconnect cables, and Monster Cable 600sw and Monoprice subwoofer cables. All the cables worked perfectly and had no problems. Associated equipment used for the review was the Sunfire TGA 7400 amplifier, Krell Evolution 403 amplifier and Buttkicker LFE Kit.. All are outstanding, reference quality products.