Please help i need this!
 

I have a hp pavilion dv6 2160em with srs surround sound on it.iam downloading the new realtek software for surround output.My problem is,i have 5 speakers and one subwoofer,2 amplifiers and i just wanna know how to make a surround sound using all of this?is it poissible,to get at least nearly surround sound?how to wire the speakers?please help

Re: Please help i need this!
 

You will need an amplifier for each channel. Does your PC have the 5.1 channel outputs?

Re: Please help i need this!
 

no my laptop have 1 mic and 2 headphones outs.but i have a surround speakers on it,and when i watch movies a real surround sound comes out of them.i tough that with good software i can compensate that?is it possible?

Re: Please help i need this!
 

With the headphone outputs you have analog 2 channel stereo only. Now that will allow for ProLogic surround only if sent to a ProLogic decoder/amplifier. In order to get 5.1 digital audio you would need a digital output. They make USB devices to provide a digital output like this one: Behringer U Control UCA202 USB Audio Interface.

Then you would need a 5.1 amplifier of some sort. A low cost home theater receiver would be one way to go. Or a complete system like this one: Optical Coaxia Aux 5.1 Surround Sound Speakers.

I know you have some speakers already, but you may need to buy a complete system since there are very few, if any, separates anymore.

Re: Please help i need this!
 

yes there you must need 5.1 channel to plug these all with !