Settings for Infinity tss 1200 sub with Denon 3808
 

I am sorry in advance if there is a similar thread elsewhere on this board. I am new here and I seek help.

It has been 17 years since I bought a new receiver so I am at a loss when it comes to the technology of the 3808.

I have a ton of questions but I will start here. I am trying to figure out the proper setting on the back of my sub woofer so it will calibrate correctly with the mic. I have a powered sub that came with my Infinity tss 1200 speaker set.

On the back of the sub it has the following:

Level: Min-Max
LFE or Normal switch
Phase switch: either 0 or 180
Crossover frequency: 50hz-150hz
Line level in: either L or R

This will sound really silly but does the 3808 have LFE? I would imagine that it does. Should I use the L or R line level in. Also what should I set the LFE switch and the Phase switch to?

The sub cable is plugged into the "SW" port on the back of my 3808. Any direction would be very appreciated-thx