Thread: Halcro SSP-200
View Single Post
Old 02-22-2008   #26
RichardS
New Member
 
Join Date: Feb 2008
Location: west coast
Posts: 1
Default Re: Halcro SSP-200

The problem is more than likely flaky contacts in the power supply wiring connectors. I notified Joe Bayer (president of Halcro) of this a few days ago so his engineer Paddy can take it up with the Finnish subcontractor who manufactures the SSP.

Parasound had this problem in the C 1 and C 2 surround controllers in 2002-2003. The C 1 and C 2 use the same Finnish mother board as the Halcro SSPs and the previous generation version of the same Finnish DSP board. The Parasound models had no further issues after their original brand wiring harness connectors were replaced with Molex trifurcon connectors. I hope this info is helpful. Richard
RichardS is offline   Reply With Quote