|
This Month's Featured Equipment Reviews |
|
|
|
|
Friday, 01 October 1999
,
Written by
Brian Kahn
Introduction
Before I start describing the unit itself and my experience with it, let’s talk about power, AC power. The vast majority of our audio components use AC power and look for that power coming in at a certain frequency, usually 60Hz. Unfortunately, in a less than perfect world, there is often a lot of "dirt" that comes in with our power, making that 60Hz sine wave less than perfect and also causing variations in voltage. This "dirty" power makes your power supplies in your equipment work harder and can also effect the sound and picture quality of what you hear and see.
Power pollution comes from many places before it gets into your home. Inside your home, many of your appliances generate noise, which travels into your power lines and into your equipment. You could do what I did and install ...
|
|
|
|
Friday, 01 October 1999
,
Written by
Kim Wilson
Introduction
Gaining control of our sound systems is more critical than ever, as
more devices are required to complete the home theater setup. Filling
the gap between inexpensive universal remotes and state-of-the-art
desktop touchscreen systems is a new breed of controller, the handheld
LCD touchscreen panel.
Entering the market at $399, Madrigal Labs (Mark Levinson and Proceed),
in partnership with Microsoft, has released the IRIQ™ Learning Remote.
Following a different scheme than other such devices, the Microsoft
programmers created the unique Setup Wizard for faster, idiot-proof
programming and the development of a method called "Activities" that
issues commands to multiple devices from a single screen.
Out-of-the-Box Programming
The curvaceous and slightly
bulbous chassis contains a 2x3-inch screen with a selector wheel and
several buttons underneath. The selector wheel is a fast and efficient
way to change TV channels or scroll through the remote’s menu items.
Pressing the wheel selects items in the menu. A Home button ...
|
|
|
|
Sunday, 01 August 1999
,
Written by
Bryan Southard
Introduction The Martin Logan Re-Quest is a hybrid electrostatic - dynamic loudspeaker system that uses a 30 degree curved electrostatic panel mounted to a dynamic subwoofer enclosure featuring a 12 inch, cast mounted driver crossed over at 280 Hz. Re-Quests are quite large, standing a little under 6 feet tall, 18 inches wide and about a foot deep. The panel's diaphragm is made of a super light proprietary vapor deposited polyester film and housed in a perforated, insulated steel frame. This diaphragm moves back and forth in small increments when fed an audio signal, thus creating Martin Logan's signature mid and high frequency sound. While the dynamic low frequency driver is not rear ported, the electrostatic panel does fire both ways making the Re-Quest quite room and placement sensitive. Re-Quests come with bass equalization, which proves to be ...
|
|
|
|
Monday, 01 February 1999
,
Written by
John Sunier
Introduction
With
the growing dependence on digital sound from sources like Compact
Discs, DVD, DSS, Laserdisc, DAT, Mini Disc and other sources, the high
end audio and home theater industry has a newly found shortage of
digital inputs. You see, most A/V receivers and lower - to mid-priced
A/V preamps, can not accept more than one or two digital inputs.
Redesigning all of the A/V receivers on the market is going to take the
better part of a year, if not longer. So what do you do if you want to
have all of the best digital audio and video has to offer without
investing in a big dollar high end A/V preamp? Enter the MSB Digital
Director.
If you have already experimented with configurations of your DAC and CD
transport you probably realize that you can't just use any old audio
cable or adapters to route digital data streams from one component to
another. ...
|
|
|
|
Sunday, 01 March 1998
,
Written by
Bryan Southard
In the eye of the beholder
My first encounter with MartinLogan electrostatic loudspeakers came
years back. Like most newcomers to this genre of speaker, I greeted
them with amazement. I found the sheer glamour of this futuristic
speaker to be simply awesome. The SL3s have a retail price of $3,400
for the standard black or natural oak trim. They stand 64 inches tall
and are a sleek 13 inches wide. The basic construction of this hybrid
loudspeaker consists of a side- supported perforated panel, which you
can see right through. The electrostatic panel sits atop the integrated
low-frequency speaker enclosure. Connection options include
hand-tightened bi-wire posts with banana plug inputs.
The reason to be passionate about this unique speaker is its
electrostatic technology. Simply explained, the lower mid- range
through the top octaves are created by taking two pieces of perforated
steel, then sandwiching a thin film of clear conductive plastic between
them. The electrostatic ...
|
|
|
|
|